Wheels

ENVE's most well-rounded road wheelset, the SES 3.4 is a climber with an aero edge. It's just the right depth to cover steep grades at speed. Since its introduction in 2009, the Smart ENVE System 3.4 has established itself as ENVE's most versatile and consequently most popular carbon fiber aero road wheelset amongst road cyclists of all abilities. The new SES 3.4 is wider than its predecessor (27.5mm wide external, 21mm internal) to improve rolling resistance and improve aerodynamics for use with 25mm tires and is available in both rim and disc brake models. In addition to added width, the versatile and reliable nature of the SES 3.4 has been augmented by incorporating road tubeless tire compatibility. Road tubeless compatibility means improved rolling resistance, comfort, traction, and a reduced propensity for flat tires. Like all SES models, the SES 3.4 features dissimilar rim shapes and geometries between front and back wheels to maximize aerodynamic efficiency and rideability in variable weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while the rear rim is 42mm deep and therefore improves overall airflow attachment. - Intended Use: Road - Inner Rim Width: 21mm - Aero Optimized Tire Size: 25c - Rim and Disc Brake Models Available - Tubeless Optimized; Tube Compatible DISC BRAKE TECHNOLOGIES GO FAST; STOP FAST: The SES 3.4 Disc features a disc brake-specific carbon fiber rim design. In other words, this is not simply a rim brake model with no brake track. Each SES Disc rim features a disc brake-specific laminate to ensure optimal performance on disc brake-equipped road, cyclocross, and triathlon bicycles. As a result of disc brake-specific engineering the SES 3.4 Disc is substantially lighter than its rim-brake counterpart but equally as stiff and impact resistant. This is accomplished because we are able to deploy the carbon fiber that previously served the requirements for heat management to now serve the requirements for stiffness and durability. Need to know: - Disc-specific construction with no brake tracks - Rims are lighter by 40-60g per rim - Impact resistance increased - Greater lateral stiffness TUBELESS COMPATIBLE SPEED, COMFORT, PROTECTION: Greater speed, comfort, grip and puncture resistance – what's not to like about road tubeless? With the selection of a high performance tire at the right pressure, you can achieve lower rolling resistance and more speed. Tubeless also allows you to run much lower tire pressures for far greater comfort, traction, and efficiency, especially over poor road surfaces and gravel, all without sacrificing speed. The potential for pinch flats and, with sealant, debris punctures is all but eliminated. ENVE recognized early that road tubeless technology is here to stay and we drew on our years of experience making the world's best mountain bike wheels to optimize the SES range for tubeless (excluding the current SES 4.5). With rims going wider and frames giving more tire clearance, the key aspects of bike design were aligned to make tubeless the best choice: wider rims make it easier to mount tubeless tires. Disc brakes add even more benefits for tubeless, typically allowing larger tires as well as removing issues of heat at the rim. Need to know: - Tubeless optimized design - Faster rolling - Higher grip - Greater comfort - Outstanding puncture resistance

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp-handling, smooth-riding, extra-durable, and 22% less likely to pinch-flat your tires—in addition to being some of the lightest-weight production wheels on the planet. - Front Hub: Alloy body, SiNC Ceramic Bearings, 15 x 110mm thru-axle, 19 and 31mm OD end cap options included - Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 54T quick engagement ratchet system cassette, includes SRAM XX1 11-speed freehub and 148 end caps - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design (Not compatible with tire inserts) - Rim Width: 29mm internal - Spokes: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross, Front & Rear - Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14 x 2.0mm - Max Rotor Size: 200mm - System Weight Limit: 275lbs / 125kg - Total Wheelset Weight: 1240g

Making up about 50% of your total race time, the bike portion of a triathlon is where equipment choices can make the difference between first and fifth. And no other equipment choice will save you more time than a disc wheel. While traditionally-shaped disc wheels are faster than their spoked counterparts, the 321 disc turns conventional design on its head, creating the fastest wheel available. Disc wheels often fall into two categories—a completely flat shape, with structure coming from carbon fiber and a honeycomb-foam filling, or a spoked wheel that's been faired with a carbon fiber cover. In our quest to break traditions, the 321 uses a single layer of 1k carbon fiber on each side of the wheel, and it all comes together at the brake track bridge. This kind of carbon fiber is rarely used in bicycle components due to its high manufacturing cost, but it offers a bevy of performance benefits. This coveted carbon is much lighter than other layups, like 3k and 12k, and it can only be laid by the most skilled of carbon fiber craftsmen. It's complicated, but the payout is worth it, as it delivers a supple ride and one of the lightest disc wheels available. And in the real world, this means that it'll spin-up quickly and reduce fatigue over the long haul. Stiffness is often the “hot-topic” in the disc wheel world, but we think it’s an interesting conversation. It's long been thought that efficient power transfer and high stiffness are directly correlated, but through extensive field testing, we've determined that this isn't the case at all. In fact, our initial disc was so stiff that, under power, it wouldn't flex with the frame and this caused brake rub. This wrongly creates the perception of a flexy wheel, when really, the wheel is actually too stiff. In order to solve the brake rub problem, we first designed our optimal aero shape and then worked on our internal stiffness targets to fit within what we consider to be a desirable frame stiffness. And while light overall weight was a development priority, our focus was aerodynamics. Through hours of Computational Fluid Dynamics (CFD) and testing in the Win Tunnel, we developed a new-to-category shape that's optimized to work with a tire for on-bike airflow. What this translates to is an all-carbon disc wheel that, on the non-drive-side, has a shape that's as aerodynamic as our current understanding allows, and a drive-side shape that's as aerodynamic as the wheel-dish and derailleur clearance will allow for. To save every possible watt, we've also added CeramicSpeed bearings and DT Swiss 240 hub internals into our hub. Each 321 Disc wheel is also 2Bliss-Ready out of the box and comes with a padded wheel bag, quick-release, tubeless valve, and SwissStop Black Prince brake pads. Designed for the most uncompromising athletes in the world, with engineering to match, the 321 Disc is the world's most advanced disc wheel for your race against the clock. - Rim Type: Carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Carbon Fiber - Brake Track Height: 12mm - Rim Depth: Solid Disc - Rim Width: 19mm internal, 27.3mm external (at brake track) - Rear Hub: Roval Disc, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Assembly Method: Handmade - Extras: Roval padded wheel bag, Roval steel quick-release, Roval tubeless valve, SwissStop Black Prince brake pads, Roval valve pocket covers - Weight: 1000g

Making up about 50% of your total race time, the bike portion of a triathlon is where equipment choices can make the difference between first and fifth, and no other equipment choice will save you more time than a disc wheel. While traditionally-shaped disc wheels are faster than their spoked counterparts, the Roval 321 Disc for disc brakes turns conventional design on its head, creating the fastest wheel on the planet. Disc wheels often fall into two categories—a completely flat shape, with structure coming from carbon fiber and a honeycomb-foam filling, or a spoked wheel that's been faired with a carbon fiber cover. In our quest to break traditions, the 321 uses a single layer of 1k carbon fiber on each side of the wheel, and it all comes together at the brake track bridge. This kind of carbon fiber is rarely used in bicycle components due to its high manufacturing cost, but it offers a bevy of performance benefits. This coveted carbon is much lighter than other layups, like 3k and 12k, and it can only be laid by the most skilled of carbon fiber craftsmen. It's complicated, but the payout is worth it, as it delivers a supple ride and one of the lightest disc wheels available. And in the real world, this means that it'll spin-up quickly and reduce fatigue over the length of the course. Stiffness is often the "hot-topic" in the disc wheel world, but we think it's an interesting conversation. It's long been thought that efficient power transfer and high stiffness are directly correlated, but through extensive field-testing, we've determined that this isn't the case at all. In fact, our initial disc was so stiff that, under power, it wouldn't flex with the frame and this caused brake rub. This wrongly creates the perception of a flexy wheel, when really, the wheel is actually too stiff. In order to solve the brake rub problem, we first designed our optimal aero shape and then worked on our internal stiffness targets to fit within what we consider to be a desirable frame stiffness. And, while light overall weight was a development priority, our focus was aerodynamics. Through hours of Computational Fluid Dynamics (CFD) and testing in the Win Tunnel, we developed a never-before-seen shape that's optimized to work with a tire for on-bike airflow. What this translates to is an all-carbon disc wheel that, on the non-drive-side, has a shape that's as aerodynamic as our current understanding allows, and a drive-side shape that's as aerodynamic as the wheel-dish and derailleur clearance will allow for. To save every possible watt, we've also added CeramicSpeed bearings and DT Swiss 240 hub internals into our hub. Each 321 Disc wheel is also 2Bliss Ready right out of the box and comes with a padded wheel bag, quick-release, and tubeless valve stem. Designed for the most uncompromising athletes in the world, with engineering to match, the 321 Disc is the world's most advanced disc wheel for your race against the clock. - Rim Type: Full carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: Solid Disc - Rim Width: 19mm internal, 27.3mm external (at brake track) - Rear Hub: Roval Disc 142x12mm, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Assembly Method: Handmade - Extras: Roval padded wheel bag, Roval tubeless valve, Roval valve pocket covers - Weight: 1015g

The CLX 64 Track Tubular was brought to life under the Allez Allez team at the 2016 Red Hook Crit. Along these lines, you get all of the unrivaled aero performance of the CLX 64, albeit with DT Swiss track hubs and Aerolite spokes, for a stiff, smooth, and most importantly, fast ride on the boards. One of the first questions we get about the CLX 64 is, “Why 64mm instead of 65mm?” To put it simply, it's because 64mm tested faster than 65mm. One millimeter—that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two-years of development, 80 variations in rim design, and nearly 300 hours of Win Tunnel testing time studying tire and frame interactions, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that’s nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel “slow” due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort.

The ENVE 45 is a modern multi-purpose road wheel in every way. Riders with inclinations toward racing and hard solo efforts will find the rim's drag-taming and cross-wind defying shape a welcome upgrade to their rides. Those with inclinations towards the road lost and forgotten will find the rim's width and anti-pinch flat technology complementary to higher-volume tubeless road tires. All said, the ENVE 45 is everything that the dynamic modern road rider needs, and nothing that they don't. - Application: Road, Road Race, Triathlon, All-Road - Internal Rim Width: 21mm - Tire Compatibility: Tubeless 25c or larger - Wheelset Weight: 1541g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

The ENVE 65 is a modern speed specialist in every way. Triathletes and road racers seeking PRs in their objectives against the clock will find their efforts rewarded by the ENVE 65. - Application: Road Race, Triathlon, Time-Trial - Internal Rim Width: 21mm - Compatible Tire Size: Tubeless 25c or larger - Wheelset Weight: 1641g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

While there may be a linear relationship between increased tire size and increased fun, this relationship only holds true when wider tires are paired with the correct width rims. Having a 2.8", or high-volume, tire mated to a narrow rim makes for a squirmy, poor handling experience, and when you’re on the hunt for additional fun, these characteristics are undesirable. Lucky for you, the new age of traction, stability, and speed has arrived—and its name is the Traverse 38 SL Fattie 27.5. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. While our 38-millimeter Traverse SL is already wider than most offerings, the benefits of three-inch tires become more apparent with a proper rim interface. In search for the proper width, our engineers tested various iterations, from 30 to 45 millimeters, to determine where the sweet spot lies. What they ended up with is a 38-millimeter internal rim width that turns the Traverse 38 SL Fatties into descending machines. A wide internal rim width endows riders with a variety of advantages that are exemplified even more with plus-sized tires. The extra width allows for more tire volume, translating into more supple ride qualities, and better support for the tire, meaning that you'll experience less "burping" when riding tubeless and a drastic increase in traction. After determining the proper rim width for the plus-sized application, we began designing the rim using the same low-weight, high-strength technologies used in the Traverse SL and the Control SL. With this, we started with our Zero Bead Hook design that effectively eliminates the biggest weak spot found in traditional rims, and topped it off by using high-modulus carbon fiber to keep the weight down. And to further this theme, the wheels also include the Roval tubeless plug system, which sheds an additional 50 grams-per-wheel compared to a rim strip Each Traverse 38 SL Fattie is hand-built to our own alloy hubs with DT Swiss Competition Race spokes. Inside our hubs, you'll find sealed cartridge bearings all-around, and a quick-engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a decent job of building wheels, we choose professionally trained humans to build ours, as they catch various flaws that a machine would otherwise miss.

Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.

Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.

With the HEC 1400 SPLINE 47, we offer the perfect endurance wheelset for e-road bikes, delivering all the advantages of the AERO+ concept mixed with e-bike-specific components to ensure a long-lasting and trouble-free ride. A valuable upgrade for any high-end e-road bike, these wheels promise premium performance and aero advantages, along with many envious glances from overtaken riders. - Shimano/SRAM 11-speed road cassette-compatible

While our Hybrid Endurance wheels are made to deliver maximum speed on tarmac, our Hybrid Gravel wheels deliver maximum fun on gravel roads. The HGC 1400 SPLINE 42 is the answer for high-end e-gravel bikes that set the benchmark in a new cycling segment. With a select mix of high-end e-specific hubs, spokes, and rims, this wheelset has the pedigree to be the uncontested King of e-gravel. - Shimano/SRAM 11-speed road cassette-compatible

Introducing the Gravel racing king — GRC 1400 SPLINE 42, the most sophisticated gravel wheelset on the market. Taking a holistic approach to engineering, we rethought the characteristics of a modern benchmark-setting gravel wheelset. Aerodynamic efficiency for sustainable speed and endurance, ideal support of wide gravel tires for unprecedented comfort and traction off-road, as well as remarkable durability make this wheelset the perfect companion for your next gravel adventure. - Shimano/SRAM 11s road cassette-compatible

The CRC 1400 SPLINE 24 — a wheelset for all those challenges off the beaten track. Whether you are competing in cyclocross races, gravel adventures, or simply the prestigious CX-lunch ride with your colleagues, these wheels will bring a smile to your face. The full carbon tubeless ready rim, laced to a straight pull 240s-based hub, combines superb performance with maximum reliability for harsh off-road use. The CRC 1400 SPLINE 24 and a set of extra-wide tubeless tires, will deliver the ideal combination of light weight, comfort, and grip while you discover new adventures.

WHAT IT'S FOR, WHY IT'S GREAT From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents—a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. ASYMMETRY BEGETS SYMMETRY The asymmetric design of the Control rim offers some subtle but important benefits. With the spokes offset to one side of the rim, this allows us to reduce the spoke offset that usually occurs at the hub. In turn, this means we can generate greater bracing angles for the spokes between the hub and rim, while also minimizing the spoke tension differential that often occurs between drive- and non-drive side spokes. The end result is a wheel that is stronger, laterally stiffer, more durable, and in the case of the Control, allows us to utilize the same length spoke throughout the whole wheelset. MINIMUM WEIGHT, MAXIMUM DURABILITY, EASY SERVICEABILITY Striking a no-hassle balance between low weight and low maintenance, we chose DT Swiss 350 Classic hubs (15x110mm thru-axle front, 12x148mm thru-axle rear) as the basis for the Control Carbon wheels. With sealed bearings, a notoriously durable 36-tooth ratchet, and 28 spokes front and rear, dependability is assured. QUALITY THROUGHOUT, FROM HUB TO SPOKE TO NIPPLE TO RIM There is absolutely no point in laying up an awesome rim and pairing it with a quality hub, only to skimp on spokes and nipples. So, keeping strength and dependability foremost in our minds, we opted to hold the Control Carbon wheel together with the best: DT Swiss Competition Race spokes and alloy Pro Lock nipples.

Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps

Roadies all drool over carbon wheels, but the price tag often puts them out of reach. The new C 38 Disc wheels break down this barrier while bringing reliable, high performance carbon road wheels to the masses. With the C 38, we developed an all-new, lightweight, and durable carbon rim with the modern features that savvy riders demand, and then we paired it with trusty DT Swiss components, like DT 350 rear hub internals and Competition spokes, for a build that ticks all the boxes on your wish list. The new C 38s are the perfect depth (38mm), too, so they'll feel at home on everything from gravel bikes, to aero bikes, and everything in between. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval tubeless tape and tubeless valves - Front Hub: DT Swiss 350 Disc for Roval, 100x12mm, Center Lock - Front Spoke Pattern: Two-cross/Radial - Nipple Type: DT Swiss Pro Lock Brass hexagonal - Rear Hub: DT Swiss 350 Disc for Roval, 142x12mm, Center Lock, 11-speed - Rear Spoke Pattern: Two-cross/Two-cross - Rim Depth: 38mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 21mm internal, 26.6mm external - Spoke Count: 24 front, 24 rear - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1,560g

The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for tough, nimble wheels like our Traverse 27.5 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering, while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously nimble and playful 27.5 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge -Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1700g

The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g

The current DT Swiss aero disc brake wheelset with a perfect synthesis of acceleration, aerodynamics, and handling, even in the most challenging conditions. The sophisticated ARC 1400 DICUT wheels represent the latest DNA of the 1400 level of DT Swiss and our aero partner, SWISS SIDE. The AERO+ profile rims set a new standard in aerodynamic performance and keep aero drag as low as possible under different cross-wind angles. In moderate cross-wind conditions, riders benefit from propulsion through a sailing effect. Reduced wind sensitivity allows riders to maintain a stable aerodynamic position and full control of their bike. High-end DT Swiss aero spokes and the lightweight 240 DICUT hub, with its direct engagement and highly reliable Ratchet EXP system, complete this wheelset. - Net weight: 859g - Recommended system weight max.: 110kg - ASTM classification: 1 - Material: Carbon - Tire interface: Tubeless crotched/Clincher TC - Valve hole: Presta - Rim diameter: 29" / 700C - Rim height: 80mm - Decal type: Waterslide - Inner width: 20mm - Outer width: 32mm - Hub type: 240 - Brake interface: Disc Center Lock - Spokes left: DT aero comp t-head - Spokes right: DT aero comp t-head - Spoke pattern: Two-cross (1:1) - Nipples: DT Pro Lock hidden aluminum - Inclusive: Tubeless tape 23mm, TL valve aluminum black 66-80mm, 5mm endcap kit, valve guard

Introducing the Gravel racing king — GRC 1400 SPLINE 42, the most sophisticated gravel wheelset on the market. Taking a holistic approach to engineering, we rethought the characteristics of a modern benchmark-setting gravel wheelset. Aerodynamic efficiency for sustainable speed and endurance, ideal support of wide gravel tires for unprecedented comfort and traction off-road, as well as remarkable durability make this wheelset the perfect companion for your next gravel adventure.

Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 562g

Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back. - Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve) - Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

Vision SC40 is the newest range of light and versatile carbon racing wheels, featuring 40mm deep rims, and disc brake hubs. They’ve been developed using extensive wind tunnel testing and on the road with professional cyclists of our sponsored teams, offering a great balance of performance and light weight at a competitive price. The full carbon rims are tubeless ready, while the alloy freehubs are compatible with Shimano 10-11 speed systems. Hand built to artisanal standards, with direct pull aero bladed spokes and ABS self-locking nipples for reliable performance and a clean rim design. - Full Carbon 40mm depth rim - Tubeless ready - Clincher rim (Max: 7 bar; 100 psi) - Centerlock rotor mount - 6 sealed cartridge bearings (2F + 4R) - DP Spokes - 24F / 24R - Includes rim tape (clincher) and spoke protector - Includes adapters for (front) QR and TA-15, and (rear) QR - Alloy Shimano 10-11sp driver

Talk about features! These wheels have everything anyone could ever ask for: leading aerodynamics, certified Road Tubeless compatibility without rim strips, unrivaled braking performance, outstanding durability and competitive weight. Don’t take our word for it - check out the results from our exhaustive wind tunnel testing. Riding these wheels in a 40-kilometer time trial saves a whopping 14 seconds over the next fastest wheel. Riders concerned with finishing times and power output can’t afford not to buy these groundbreaking wheels. These aren’t simply race-day only wheels, they’re built strong. Easton’s industry-leading carbon lay-up process provides smooth, consistent braking. Like every high-end wheel in the Easton line, EC90 Aero 55 wheels are entirely built by hand from start to finish and acoustically tuned. These wheels combine top-end materials, a methodical build and an advanced rim design. They are extraordinarily fast wheels that will roll true for years to come.

Our benchmark-setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25mm rubber, the ERC 1400 SPLINE will aero optimize your race bike, ready for you to set your own, new benchmarks.

Unsure what will happen on your group ride? Mountains, hills or flat sections? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. high-end, bladed straightpull spokes and the most reliable and light-weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. Equipped with disc brakes it will stop on a dime all the time. So the PRC 1400 SPLINE 35 is ready for anything, are you?

Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

All Mountain riding is all about progression going bigger, steeper, faster. And in that spirit, the Next R carbon wheelset will be your trusted partner in progression. Dialed-in technology + design adds confidence and strength to your MTB game. - Big time strength and lightweight durability are all part of the Next R charm. A UD rim layup with a 31mm inner width helps it handle all with style - Offset spoke nipples laced with uniform double-butted straight pull spokes achieve ideal wheel stiffness. Spare spokes included - With ultra-fast 3-degree engagement, the Vault hub keeps your world spinning

Exploring your limits has never looked so good. The all new EC90 AX carbon wheelset joins Easton's AX series as high performance, high adventure wheels built to endure. Race-ready weight, reliable design, and fire-road tested durability mean you can seek more while stopping less. EC90 AX wheels are built to keep you rolling, wherever the path less traveled leads. Wide, 24mm internal rims on both wheelsets are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, singletrack forays, and unrelenting gravel races. Like all our EC90 wheels laced to Vault disc hubs, the EC90 AX wheelset is covered by our carbon confidence guarantee.